The technical realization elements of the filter housing that is easy to disassemble and assemble

Technical realization elements:

4. The purpose of the present utility model is to provide a filter housing that is easy to disassemble and assemble, so as to solve the need for a special filter housing to be fixed for the existing filter proposed in the background art, but the previous filter The cleaner housing is inconvenient to disassemble and install, the filter element cannot be quickly installed and fixed, and the oil filter element is inconvenient to install inside the filter housing.

5. In order to achieve the above objective, the present utility model provides the following technical solutions: a filter housing that is easy to disassemble and assemble, including a device housing, the upper end of the device housing is fixedly installed with a device top cover, and the upper end of the device top cover Four fixed blocks are slidably connected, the lower end of the fixed block is fixedly installed with a sliding block, the lower end of the sliding block is located on the upper end surface of the top cover of the device, and a sliding groove is provided, and the sliding block is slidably connected to the inner side of the sliding groove, The inner side of the device casing is provided with a fixing groove at one end of the sliding block, and the sliding block is clamped on the inner side of the fixing groove. The lower end of the device casing is fixedly installed with a device bottom cover. The position is provided with a convex block, the center of the upper end surface of the convex block is provided with a positioning hole, and the outer side of the positioning hole is located on the upper end surface of the convex block with a limiting groove.

6. Preferably, a groove is provided at the center of the upper end surface of the top cover of the device.

7. Preferably, the lower end of the device top cover is located inside the device housing, and the filter body is fixedly installed.

8. Preferably, both ends of the filter body are provided with round bumps.

9. Preferably, the slider is an l-shaped bump.

10. Preferably, an anti-dropping pad is provided on the upper end of the bottom cover of the device.

11. Preferably, a number of through holes are provided on the inside of the device housing.

12. Compared with the prior art, the beneficial effects of this utility model are:

13.1. The utility model is slidably connected to the inner side of the sliding groove through the sliding block. The inside of the device housing is provided with a fixing groove at one end of the sliding block, and the sliding block is clamped on the inner side of the fixing groove by the sliding fixing block, which is convenient for the staff to check Installation and disassembly of the device;

14.2. According to the utility model, a convex block is provided at the center of the upper end surface of the bottom cover of the device, a positioning hole is provided in the center of the upper end surface of the convex block, and the outer side of the positioning hole is located on the upper end surface of the convex block. The hole and the limit groove install and position the filter body, which facilitates the installation and replacement of the filter body through the bottom cover of the device.

Please contact us at zhang@pride-cnc.com